Awesome model by Steiner 3D: https://www.thingiverse.com/thing:300…
0:00 Intro
1:14 Timelapses
2:28 Assembly
9:12 Bullets
11:03 Outro
Do you have any ideas what I can make next? Any questions, thoughts? Leave a comment now!
You can support me in various ways:
– smash the like button and subscribe to my channel: https://bit.ly/medyk3Dsub – that really helps me, thanks!
– buy me a coffee (filament in fact): https://www.buymeacoffee.com/TmjEfCc
For more info about me you can visit:
Thingiverse: https://bit.ly/medyk3Dthingiverse
MyMiniFactory: http://bit.ly/medyk3Dmmf
My blog: https://medyk3d.com
Lbry: https://lbry.tv/$/invite/@medyk3D:e
Twitter: https://twitter.com/DMedyk3/
Instagram: https://www.instagram.com/medyk3d/
Share the love and 3D print everything. Many thanks to the whole 3D printing community.
music by: Jamessi Light Tune ~ No.1 licensed under CC0 freesound.org/people/Jamessi/sounds/410520/
Edit 2021-06-19: Because description on Thingiverse is missing now I uploaded the pdf here (it was all created by Steiner 3D S y s t e m s):
Part list:
Google Drive link:
https://drive.google.com/file/d/1jgDOOmatyV_9LQQVwydKxun8ZQX1vr4M/view?usp=sharing
Bolts list:
1x M5x50 03 ISO 4762
1x Spring 4×18 ( 0,4) 27 from pen ****)
1x ST4,2×18 (non standard length) 26 (ISO 7049) *) **)
4x ST4,2×13 (ST4,2×11 to ST4,2×13) 25 ISO 7049 *)
4x ST4,2×10 (ST4,2×9 to ST4,2×14) 24 ISO 7049 *)
1x ST4,2×7 (non standard lenght) 23 (ISO 7049) *) ***)
1x ST4,2×4,5 (standard length) 22 ISO 7049 *) ***)
1x ST2,9×7,5 (non standard length) 21 (ISO 7049) *) ***)
1x M5x30 20 ISO 4762
*) “Sheet Metal” screw (ST)
Standardized available
lengths: 4,5/6,5/9,5/13/16/
19/22/25/32/39mm
**) flat tip recommended
***) flat tip required
For flat tips, get longer
screws and cut them to
the needed length.
****)outer diameter: max 4mm
wire diameter: ~0,4mm
length: min 18mm
compressed: max 6mm